+31 (0)76 596 9250

World’s best stuff for leaks, drips and spills.®

  EASTER OPENING HOURS - Our customer service department will close on Friday 29th March at 5.15 p.m. and reopen on Tuesday 2nd April at 9 a.m. All orders placed during this period will be processed on Tuesday 2nd April. 

PIG® Drive-Over Build-A-Berm® Barrier

  • Provides permanent or semi-permanent containment in high-traffic areas on concrete, asphalt or most sealed surfaces. Create any configuration by combining with other Build-A-Berm components; ends overlap and can be sealed together for liquid-proof containment
  • Constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core; berm compresses to approximately 6mm when driven over; springs back to shape when vehicles pass
  • Durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles with sufficient ground clearance
  • Pre-drilled aluminium mounting strips with steel anchors secure berm to most surfaces; remove anchors to reposition, then seal with caulking (not included)
  • Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your barrier
  • Sealed, 90-degree wall end sits flush against the floor and a wall, curb, etc. Helps you create professional containment areas without fabrication or using excessive caulk
Item Number Product Name Dimensions Details Unit
PLR283 PIG® Drive-Over Build-A-Berm® Barrier 14cm W x 366cm L x 5cm H -30°C (-22°F) to 71°C (160°F) Temperature Limit 1/Box
PLR109 Wall End for PIG® Drive-Over Build-A-Berm® Barrier 14cm W x 8cm L x 5cm H -30°C (-22°F) to 71°C (160°F) Temperature Limit 2/Box
PLR108 Vented Corner for PIG® Drive-Over Build-A-Berm® Barrier 14cm W x 29cm L x 5cm H -30°C (-22°F) to 71°C (160°F) Temperature Limit 2/Box

Product Data Sheet

Chemical Compatibility Guide

REACH Statement